Properly lubing your overhead door



Have you been having trouble trying to eliminate the squeaking noise resulting from your garage door? We really want to explain to you how to deal with that problem with a several do-it-yourself solutions and some valuable information on how to properly lubricate your garage door.

One of the most common errors that homeowners make when greasing the garage door is that they use regular oil or ever-so-popular WD 40. The main problem with WD-40 and oil is that they're degreasers, so they're actually eliminating the grease rather than helping your situation.

The most ideal thing to use is a lithium-based grease. If you can't find the lithium spray at your local Home Depot, Lowe's or hardware store, second best thing would be a silicone spray, it's not like lithium but it's a hundred times better than using WD-40. The lithium spray leaves a generous thick coat that doesn't run or drip like oil.

How to lubricate your garage door properly?

You want to lubricate all moving parts of the door. Make sure that your door is in a closed position and disconnect the door from the garage door opener. You should be able to move your doors manually around the bend of the track, make certain you grease all moving connections. The next things you shall lubricate are your rollers, one of the most common rollers that most manufacturing and garage door companies are using are plastic rollers or metal rollers. If you have plastic rollers you can put some grease on it, but we're uncertain just how much good that's actually going to do because these rollers have no wall bearings and they're only designed to last a few years, so you should probably be replacing them anyway. Those ball bearings check here always need to be greased if you have metal rollers you can see the ball bearings. Use the straw so when you spray your grease, it can get in there and fill it up. Remember, you'll be doing so with rollers in place on the door track so ensure to do it with good lighting. You may need to use a ladder to get to those top spots.

Garage door opener chains come out of the factory with a protective coat already on it that should last the life of the motor. If you ever feel the need to give your chain a little love to help maintain it take a cloth spread a little WD-40 on it and wipe it down that'll help repel moisture.

What you need to do is lubricate the top of the rail, that's where all your friction is, not at the bottom. The majority of people spray the bottom of the rail, that's not going to hurt but it's not going to do anything either just going to create a mess that drips anywhere your car your floor your head.

Another thing you don't need to grease is your garage door track. If you think you see symptoms that make you think you need to grease a track, then you have something wrong with your door.

The grease is going to do two things in your torsion spring, one is going to reduce the amount of noise that you hear from the friction, secondly, most of the companies out there only use oil tempered or galvanized springs so the grease help prevent rust build-up here at Calgary Garage Door Fix, we prefer powder coated springs. The last thing you need to grease in a torsion spring door or the bearing plates is your bearing, there's two more located on both sides of the door, that bar sits inside these bearings. If you feel your garage door need a service, you should immediately contact a professional door technician, you will be safe and your garage door will be working perfectly for years to come!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Properly lubing your overhead door”

Leave a Reply

Gravatar